This will mean more 1 foot square boards to join the existing collection, to accommodate some additional features in order to provide me with more scenario and tabletop options. One priority is for some more hills, especially some slightly bigger ones than I currently have. The ones I've done previously are fairly small and low - one of the natural drawbacks of 1 foot boards I guess.
I have (like all sensible wargamers) collected a variety of polystyrene pieces from packaging over the years, and I recently dug out a few promising candidates to take the good old hot wire cutter to. Pic below, black undercoated 28mm figures in the centre background give a sense of scale..
In order to completely integrate them into the small size of the terrain boards, I need to get them 'up and down' in under a foot of space. Inevitably there are compromises, but they are reasonable gaming compromises and I can live with them. On the larger hills I have been happy to leave a flat top as there is a practical need to be able to place figures and scenery on them without having trees and building leaning over. The smaller ones are really more for providing some undulations to otherwise flat boards and should work OK. The thickest sheet of polystyrene I had was big enough to provide 2 hill 'halves' which can be placed back to back for a large hill, or separately on the table edge. I'd like to perhaps do more of this type, perhaps something much bigger with 4 'quarter' hills.
None of these 'hills' are more than 25mm tall, but for the variety of scales I will use them with (6mm-28mm) they'll give a decent impression and break up the general flatness a bit. I'm hoping to have a crack at stage 2 (sticking them to the boards and applying a layer of plaster) at the weekend and will post an update when I've managed this. I will also then be able to dig out the raw materials for the other part of this terrain expansion exercise and get to work on everything from there..